Enema Recliner Chair Safety instructions

Be certain that the enema chair instructions are understood before it is used

  1. Verify that there is adequate space in your washroom to fit the enema bench. The distance between the toilet base and wall should be minimum 35 inches, 90 cm.   Note: For smaller washrooms the enema chair can be used without a head support. The distance between the toilet base and wall should be minimum 23,5 inches, 60 cm.
  2. Set the chair in front of the toilet and secure it with a belt around the toilet or anchor to a hook on the wall to prevent movement and increase stability. Anchors should have a minimum pull out force of 220 lbs (110 kgs)
  3. Make sure all users are properly instructed on how to use the enema bench.
  4. Do not allow to excess the maximum weight capacity of 300 lbs. This can result in instability and lead to injuries.
  5. Do not jump on the chair
  6. Do not sit in a backward position on the chair
  7. Keep children away from the enema chair.
  8.  It is recommended that users receive a thorough medical exam before commencing a colon hydrotherapy administration.
  9. If the chair appears damaged or inoperable, only use Samsonosong supplied replacement components to service this bench.

Usage Instruction

  1. Unpack the chair.
  2. Unfold the legs
  3. Place the bar between legs and secure it with the bolts
  4. Adjust the chair height to the toilet’s height
  5. Place one of the rubber feet onto the bottom of legs as shown.
  6. Attach the head support to the frame with screws and tight up with screw driver
  7. Attach the upholstery to head support frame
  8. Position the enema bench right up to the toilet
  9. Adjust the reclining position of the back of the chair to your comfort level.  You can place a pillow on the back of the chair and soft toilet cushion for additional comfort. The user sits on the toilet seat in a backward position facing the toilet tank and leans against the back-enema chair.

Exercise bench safety instructions

The enema bench can be utilised as an exercise bench to perform light weightlifting and body stretching exercise.

  1. Load weight plates evenly and carefully to avoid tipping bench and crushing injuries.
  2. Do not exceed the maximum weight capacity of the chair (300 lbs including weightlifting plates).
  3. .
  4. Read this Installation Manual entirely before assembling the product. 
  5. Use the chair on a solid level.  

THE WARRANTY PERIODS COMMENCE ON THE INVOICE DATE OF THE ORIGINAL PURCHASE. LABOR COVERED DURING WARRANTY PERIODS. SAMSONOSONG WARRANTS TO THE ORIGINAL BUYER OF ALL NEW EQUIPMENT PURCHASED FROM A SAMSONOSONG AUTHORIZED DEALER THAT THESE PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND SERVICE FOR THE FOLLOWING PERIODS AND IN THE FOLLOWING RESPECTS:

 LIFE TIME WARRANTY– Frame Components and Welds excluding coatings • ONE YEAR WARRANTY – UPHOLSTERED PARTS.

  1. Flip the chair upside down
  2. Placed the bar between the legs
  3. Insert the bolt into the hole
  4. Secure the bolt with the wrench
  5. Twist the bolt’s nut from another side to tight up the bolt
  6. Insert the leg extension and adjust it to the toilet height
  7. Repeat steps 3-5

  1. Attach the upholstery frame to the head support
  2. Repeat steps 3-5
  3. Attach the head support
  4. Repeat steps 3-5

  1. For an extra security attach the chair to the base of toilet



Foam cushion for an extra comfort. Protect the cushion with a disposable bag

The package includes:

1Chair Frame
1 Head support
1 Head support upholstery
4 Extension legs
8 bolts
1 wrench
1 belt

Attention! For your convenience bolts inserted into all parts of the chair.